Products
- Thermocouple
- Mineral Insulated thermocouple
- Industrial Thermocouple
- Thermocouple With Cable
- Thermal Resistance
- Industrial Pt100 RTD
- RTD With Cable
- Thin Film Elememnt( Heraeus)
- Thermocouple Connecctor
- Standard Thermocouple Connector
- Miniature Thermocouple Connector
- Thermocouple Head
- Alluminum Thermocouple Head
- SS Thermocouple Head
- Bimetal Thermometer
- Industrial Bimetal Thermometer
- Pocket Thermometer
- Thermocouple Cable
- Temperature Indicator&Controller
- Single Channel Display Indicator
- Multi-Channel Display Indicator
- Hart Communicator
- Hart 375 Communicator
- Hart 475 Communicator
- Hart Modem
- Position Sensor
- VOLFA Position Sensor
- Novotechnik Position Sensor
Products Search
Name:Thermocouple with Transmitter
1.Type: K
2.Diameter:8mm
3.Temperature range:0-1000C
4.L=750/500mm
5.Alluminum Junstion Box
6.SS 304 Sheath
Description
Introduction
The two-wire transmitter receives and measures signals from themocouples and sends an output current of 4-20mA which is directly proportional to the thermocouple millivolt input. It is designed to connect with only two copper wire leads that will supply the voltage to operate the transmitter from a power supply, and also carry the output current. Theoutput current is used for recording, computing, or controlling.If the transmitter is mounted inside a protection head, the thermocouple extension wires are replaced by two copper wires that carry the 4-20mA signal and dc voltage to operate the transmitter.
Application
It is usually connected with display meter, recording meter, computer, etc. to directly measure temperature of liquid, vapor, gas and solid surface ranging from 0℃ to 1800℃ with output of 4 ~ 20mA.
Features
1.Double wire system output of 4 ~ 20mA, good anti-interferenceperformance
2.Spare cost on compensational wire and temperature transmitter installation
3. Wide measuring range
4. Automatic compensation at cold end, non-linear rectifying circuit
