Products
- Thermocouple
- Mineral Insulated thermocouple
- Industrial Thermocouple
- Thermocouple With Cable
- Thermal Resistance
- Industrial Pt100 RTD
- RTD With Cable
- Thin Film Elememnt( Heraeus)
- Thermocouple Connecctor
- Standard Thermocouple Connector
- Miniature Thermocouple Connector
- Thermocouple Head
- Alluminum Thermocouple Head
- SS Thermocouple Head
- Bimetal Thermometer
- Industrial Bimetal Thermometer
- Pocket Thermometer
- Thermocouple Cable
- Temperature Indicator&Controller
- Single Channel Display Indicator
- Multi-Channel Display Indicator
- Hart Communicator
- Hart 375 Communicator
- Hart 475 Communicator
- Hart Modem
- Position Sensor
- VOLFA Position Sensor
- Novotechnik Position Sensor
Products Search
Name:Hart 375E Communicator
a) In conformity with HART Protocol (HCF);
b) Operating mode: intercommunication semiduplex 1200bit/s
c) Receivable voltage: ±40V
d) Leakage current less than 1uA at 20°C
e) Communication distance less than 1500m
f) Isolation mode: isolation between HART communication connector and power supply
g) Rating isolation voltage: 500Vrms
Description
Brief Introduction
SRK-375E HART Hand Held Communicator is a hand held interface based on HART protocol, which could perform configuration, management, maintenance and adjustment to all HARTcompatible instruments.
SRK-375E HART Hand Held Communicator can be easily connected into 4~20mA loop,
to achieve the configuration of instrument parameters (upper limit and lower limit etc.), the reading of instrument variables, as well as the diagnosis and maintenance of the instrument. This Communicator could support not only the HART main device (HART multiplexer etc.), but also the peer-to-peer and multidrop HART communication modes.
Technical Specifications
1. Dimension
SRK-375E: 228mm x 98mm x 60mm
(Clips and cable not included)
2. HART® Connector
a) In conformity with HART Protocol (HCF);
b) Operating mode: intercommunication semiduplex 1200bit/s
c) Receivable voltage: ±40V
d) Leakage current less than 1uA at 20°C
e) Communication distance less than 1500m
f) Isolation mode: isolation between HART communication connector and power supply
g) Rating isolation voltage: 500Vrms
3. PC Connector
This connector is used for software update. Please contact with us for the detailed information on software update.
4. Power Supply
Power Supply: 4.5V DC;
Power Consumption: 91.3mA (Typical value under working state)
1uA (Typical value under power-off state)
5. Battery
Power Supply: Three AA 1.5V alkaline batteries or rechargeable NiCad/NiMH batteries.
Battery Life: 100 hours (AA Alkaline Batteries)
80 hours (1000mA Rechargeable Batteries)
6. 1 year warranty